Written by
Clara Bennett Appliance Care EditorPublished October 20, 2026
Content status:
Verified
Error code1 flash
ApplianceIce Maker
Quick answer
One flash of the diagnostic LED on a revised CLR2060 control board points to an open overflow protection circuit.
Model compatibility: U-Line reuses codes across series and model years, so 1 flash may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Overflow protection circuit open (only on units with P-60 pump).
A single flash from the diagnostic LED on a U-Line clear ice maker means the overflow protection circuit is open. The code applies only to units fitted with the P-60 pump.
Which units
This is the legacy CLR2060 built after 12/1/03, which has the revised control board with a diagnostic LED. It is an older series. The manual calls the new board similar to the one on the CLRCO2075 clear ice maker and refrigerator.
Clearing the code
Interrupting power to the board is the only method the manual gives for clearing it. Turning the ON/OFF/CLN switch off does not clear it. A steady LED means the board has power and operation is normal.
For a CLR2060 ice maker in Los Angeles, call (310) 879-5776. Tell them the LED flashes once, give the model number and say whether you already interrupted power to the board. See ice maker repair.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your U-Line appliance?
Book a specialist visit for a clear estimate and approval before any repair.
U-Line products are compact, built-in, and often visually similar across generations. Effective repair starts with the exact model, the symptom you can…
