Skip to content
Error Code

U-Line Ice Maker 2 Flashes Error Code

Request U-Line Service (310) 879-5776
Clara Bennett Written by Clara Bennett Appliance Care Editor Published October 20, 2026

Content status: Verified

Error code 2 flashes
Appliance Ice Maker
Quick answer

Two flashes on the diagnostic LED of a U-Line CLR2060 clear ice maker point to an open thermistor or a reading that is out of range because it is too warm.

Model compatibility: U-Line reuses codes across series and model years, so 2 flashes may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Two flashes indicate an open thermistor or an out-of-range, too warm, problem.

A U-Line clear ice maker that blinks its diagnostic LED twice in a row is reporting an open thermistor, or a reading that is out of range because it is too warm.

Which units show flashing codes

This applies to the CLR2060 manufactured after 12/1/03, which carries the revised control board with the diagnostic LED. It is an older series.

How the LED signals work

  • One flash: the overflow protection circuit is open, and this is checked only on units with a P-60 pump.
  • Two flashes: the open thermistor or too-warm problem described above.
  • Three flashes: the unit has both conditions.

Clearing the code

The only way to clear an error code is to interrupt power to the board. Turning off the ON/OFF/CLN switch does not clear it. If the flashing returns after power is restored, the problem is still present and the unit needs a technician.

Related flash codes

  • 3 flashes when both failure conditions are present
  • 1 flash for an open overflow protection circuit

U-Line ice maker service in Los Angeles

For U-Line ice maker service in Los Angeles, call (310) 879-5776. Have the two-flash pattern, your CLR2060 model number and a note of what you tried ready when you call.

Source: U-Line Service and Parts Manual P/N 30-10010 (Rev. 2/05), control board LED

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your U-Line appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Request U-Line Service (310) 879-5776

Ready to get your U-Line appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Request U-Line Service (310) 879-5776
Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Phone (310) 879-5776
Email info@ulinelosangeles.support
Service area Los Angeles & Orange County

Request your repair

Fields marked with * are required.