Skip to content
Error Code

U-Line Ice Maker 3 Flashes Error Code

Request U-Line Service (310) 879-5776
Clara Bennett Written by Clara Bennett Appliance Care Editor Published October 20, 2026

Content status: Verified

Error code 3 flashes
Appliance Ice Maker
Quick answer

Three flashes on the diagnostic LED of a U-Line CLR2060 clear ice maker mean both failure conditions are present together.

Model compatibility: U-Line reuses codes across series and model years, so 3 flashes may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Three flashes indicate the unit has both failure conditions at once.

Three blinks of the diagnostic LED on a U-Line CLR2060 clear ice maker mean the control board has found both of its failure conditions at once.

The two conditions behind the signal

The first is an open overflow protection circuit, which is monitored only on units fitted with a P-60 pump. The second is an open thermistor, or a temperature that is out of range because it is too warm. When the board reports both, the LED flashes three times.

Which units this covers

CLR2060 models manufactured after 12/1/03, with the revised control board and its diagnostic LED. This is a legacy series.

Clearing the flashes

Only interrupting power to the board clears the codes. Switching the ON/OFF/CLN switch to off leaves them in place.

Compare with the single codes

  • 2 flashes reports only the thermistor or too-warm condition.
  • 1 flash reports only the open overflow protection circuit.

Los Angeles U-Line ice maker repair

If three flashes return after power to the board has been interrupted, (310) 879-5776 reaches the team handling U-Line ice maker service in Los Angeles. Read out your model number and the flash count, and mention anything you already tried. See also ice maker repair.

Source: U-Line Service and Parts Manual P/N 30-10010 (Rev. 2/05), control board LED

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your U-Line appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Request U-Line Service (310) 879-5776

Ready to get your U-Line appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Request U-Line Service (310) 879-5776
Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Phone (310) 879-5776
Email info@ulinelosangeles.support
Service area Los Angeles & Orange County

Request your repair

Fields marked with * are required.